HPS rope type displacement sensor

HPS rope displacement sensor, measuring range 300mm~7000mm, sensor signal output types are: resistance output, voltage output (0-5V; 0-10V), current output (4-20mA, two-wire or three-wire system), pulse output (AB Phase or ABZ phase incremental square wave), RS485 digital signal or absolute coded output is optional. The sensor has high precision, good stability, convenient installation and use, and is widely used in the automation industry.

Features: long service life, up to 5 million times of operation,

       High precision, linear accuracy 0.15%, repeatability accuracy 0.02%

       Variety of models, a variety of signal output options, convenient system acquisition or long-distance transmission

       High degree of protection, special custom waterproof, open-air use

Description: Housing Anodized Aluminum

       Assembled crimping brackets, some models are screwed

       Measuring element potentiometer, encoder

Includes accessory kit (4 screws)

Main performance parameters of the sensor:

Sensor installation dimension drawing:

Sensor wiring instructions:

(The sensor is forbidden to connect to 220V AC industrial power supply. The three-wire current output rope displacement sensor should be connected to the load first, and then commissioned at power to avoid overload damage.)

The main application areas of the sensor: HPS rope displacement sensor has a wide range of applications, mainly for: storage location positioning, reservoir dam protection, gate opening control, pressure machinery, paper machinery, textile machinery, sheet metal machinery, packaging machinery, printing Mechanical, level control instrument, construction machinery, industrial robot, injection machine, woodworking machinery, elevator, air compressor, hydraulic press, height machine, XY axis and other length displacement, liquid level measurement and other automated measurement occasions.

HPS rope displacement sensor installation instructions:

1. Select the range of the rope displacement sensor to leave a margin. It is forbidden to use the over-range. Generally, the range of the larger specification can be selected on the basis of the actual stroke.

2. Use the sensor mounting bracket or fixing screw hole to install or add protection device directly according to the needs of the site and the installation space of the machine.

3. When the cable sensor is installed and used, it must be noted that the drawstring and the rope exit are parallel (allowing a maximum deviation of ±3°) to ensure the measurement accuracy and service life of the sensor.

4, drawstring displacement sensor drawstring material is stainless steel wire rope, please pay attention to protect against external force wear, scratches, dust or debris invading the sensor, resulting in sensor running is not smooth.

5. Before the cable displacement sensor is installed and fixed, do not pull the cable out and bounce it back. This will cause the cable to break. In severe cases, the potentiometer (or encoder) can be damaged.

6. The instantaneous speed of the reciprocating motion of the rope displacement sensor should be less than 1m/s; the range above 4000mm should be less than 0.5m/s.

7. The running direction of the drawstring displacement sensor should be kept horizontal with the direction of the rope exit. If the running direction changes, a pulley device should be installed.

8, open-air use or wet environment, should be customized waterproof and dustproof type (please contact us before ordering).